Shopping Cart 
0 product(s) in cart. Total: 0 EUR
0 product(s) in cart. Total: 0 EUR
On the back panel you will find the following connectors:
Connect the USB to your PC/Mac and the audio outputs to your mixer. Note! Otus controller calibrates its touch sensitive platter every time you connect the USB cable to your computer. If you have your hand on the wheel while connecting the device, the calibration will be incorrect. It is a good practice to first connect the USB cable to the controller and then to your computer, keeping your body parts away from the wheel. After connecting the controller to your computer for the first time, the operating system takes a few moments to identify the device and load the USB drivers. This is normal. Just click Next and OK for any dialogs appearing. If you have more than one controller, let your operating system identify one player at a time and finish the process before connecting the second one.
Otus can be configured in various ways: to work as a two channel audio interface, an all-in-one control device or a simple MIDI controller without audio. Here's a few basic ways to connect Otus to your DJ setup.
In the first setup the Otus is connected to a standard external DJ mixer of your choice. This allows a quick and easy setup in a club or in other hectic situations. Otus is also designed to fit on top of a standard vinyl turntable, which makes it easy to fit it in any DJ booth. [Video]
In this second setup the Otus is used as a all-in-one DJ control device, which can be connected directly to your amplifier or PA system. The Otus features a headphone jack, enabling direct preview of your music. [Video]
In the third basic setup the Otus is used only as a MIDI controller and the audio is routed through the audio interface of your computer or an external soundcard. This way you can utilize the Otus to control as many virtual decks as your DJ software of choice allows. [Video]
Contact informationWeb: http://eks.fi E-mail: Phone: +358-9-2609115 Mail address: In the EKS Materials Bank you will find products images, press releases, logotypes etc. North American marketing inquiries: Brian Metcalf Phone: 305-576-1171 x11 |